菲希尔涡流探头FTA3.3H的详细资料：
| 品牌 | Helmut Fischer/德国菲希尔 |
|---|
菲希尔涡流探头FTA3.3H
ISOSCOPE FMP10涡流涂层测厚仪标准配置：ISOSCOPE FMP10主机+FTA-3.3H涡流探头
DELTASCOPE FMP10 为磁性涂层测厚仪，订货号：604-301
ISOSCOPE FMP10为涡流涂层测厚仪，订货号：604-298
DUALSCOPE FMP20为磁性/涡流涂层测厚仪，订货号：604-285
DELTASCOPE FMP30为磁性涂层测厚仪，订货号：604-297
ISOSCOPE FMP30为涡流涂层测厚仪，订货号：604-299
DUALSCOPE FMP40为磁性/涡流双功能涂层测厚仪，订货号：604-286
常用涡流探头：FTA3.3H，订货号：604-142，测量范围：0 - 1200 μm
Characteristic Features of the ISOSCOPE FMP10-30:For all eddy current probes
Features additional to those of the basic series:
Memory for up to 20,000 readings
Up to 100 calibratable applications
Capability of allocating readings into up to 4,000 Blocks
Date and time stamp for blocks
Statistics display of common characteristic values in the block and final results. Output of characteristic variance-analytical values
Graphical measurement display as a histogram with a Gaussian plot
Capability of entering process tolerance limits and computation of the associated process capability indices cp and cpk
Audible and visual warning when tolerance limits are exceeded
Free-running display with additional presentation of the reading as an analog bar between the tolerance limits
External key-triggered measurement acquisition, e.g., in hollow cylinders with small diameters
Capability to enable matrix measurement mode for connected multi-point measurements
Capability of averaging measurement data: Only the mean value of several readings will be stored
Measurement acquisition through area measurement possible: Only the single readings until probe lift-off are captured and averaged
Capability to measure continuously with the probe placed on the specimen
Outlier rejection for the automatic elimination of erroneous measurements
Correction of any stored reading
Application linking mode: Ability for common normalization/calibration of applications
Designations for applications through the optional PC program MP-Name
USB port to a printer
Battery and line power operation
| 如果你对菲希尔涡流探头FTA3.3H感兴趣，想了解更详细的产品信息，填写下表直接与厂家联系： |